Journal of Hydraulic Structures

Journal of Hydraulic Structures

Investigation of the Effect of Time-Dependent Viscosity on the Penetration of Cement Grout in Rock Fractures Using a Numerical Modeling Approach

Document Type : Research Paper

Authors
1 Department of Mining Engineering, University of Kashan, Kashan, Iran.
2 Department of Mechanical Engineering, University of Kashan, Kashan, Iran.
Abstract
The effect of time-dependent viscosity on cement grout penetration in rock fractures, critical for enhancing the stability and impermeability of underground structures like tunnels and dams, was investigated. We developed an analytical model based on Newton’s second law, assuming a frictionless horizontal fracture and modeling grout as a rheopectic Bingham fluid. Grouts with density of 1325, 1475, 1625, and 1725 kg/m³, derived from varying water-to-cement ratios, have been analyzed. Numerical simulations, conducted using Gambit for mesh generation (1.225 million 2D cells, 3.15 million 3D cells) Done, and by investigating various viscosity functions to achieve the optimal combination with maximum penetration depth, processing has been carried out in ANSYS Fluent. Results show that higher water-to-cement ratios lower viscosity, increasing washout risks, while higher density accelerates setting, reducing penetration depth. A gradual 0.01-bar injection pressure has been shown to optimize penetration by minimizing filter cake formation. Governed by Navier-Stokes equations, the Bingham model accurately describes grout rheology, with stoppage times of 1–13 minutes influenced by viscosity and density. Validated against experimental data, the models provide a robust framework for optimizing injection parameters, offering practical solutions for effective water seepage control in underground engineering.
Keywords
Subjects

  1. Li, S., et al., Protection against water or mud inrush in tunnels by grouting: a review. Journal of Rock Mechanics and Geotechnical Engineering, 2016. 8(5): p. 753–766. https://doi: 10.1016/j.jrmge.2016.05.002.
  2. Berigny, C., Historical development of grouting techniques for underwater structures. Journal of Civil Engineering History, 1802.
  3. Axelsson, M., G. Gustafson, and Å. Fransson, Stop mechanism for cementitious grouts at different water-to-cement ratios. Tunnelling and Underground Space Technology, 2009. 24(4): p. 390–397.
  4. Gothäll, R. and H. Stille, Fracture dilation during grouting. Tunnelling and underground space technology, 2009. 24(2): p. 126–135.
  5. Rafi, J.Y. and H. Stille, Basic mechanism of elastic jacking and impact of fracture aperture change on grout spread, transmissivity and penetrability. Tunnelling and Underground Space Technology, 2015. 49: p. 174–187.
  6. Mohammed, M.H., R. Pusch, and S. Knutsson, Study of cement-grout penetration into fractures under static and oscillatory conditions. Tunnelling and Underground Space Technology, 2015. 45: p. 10–19.
  7. Sui, W., et al., Experimental investigation on sealing efficiency of chemical grouting in rock fracture with flowing water. Tunnelling and Underground Space Technology, 2015. 50: p. 239–249.
  8. Ruan, W.J., Analytical model for grout transport in fractured media with time-dependent viscosity. Journal of Geotechnical Engineering, 2007. 133(8): p. 987–995.
  9. Sonebi, M., Experimental study on cement grouts with viscosity-modifying additives. Materials and Structures, 2008. 41(2): p. 255–267. https://doi: 10.1016/j.cemconres.2006.05.016.
  10. Şahmaran, M., et al., Use of natural zeolite in cement-based grouts for improved rheology. Cement and Concrete Composites, 2010. 32(6): p. 444–452. https://doi: 10.1016/j.cemconres.2008.03.007
  11. Quinn, P., et al., Numerical modeling of time-dependent viscosity in cement grouts using OpenFOAM. Computers and Geotechnics, 2012. 45: p. 67–75.
  12. Karol, R.H., Chemical grouting and soil stabilization. CRC Press, 2003. https://doi:1201/9780203911815.
  13. Li, S., et al., Apparent viscosity of cement grouts with varying water-to-cement ratios. Construction and Building Materials, 2014. 69: p. 232–239.
  14. Assaad, J.J., Real-time viscosity monitoring of cement-based grouts. Journal of Materials in Civil Engineering, 2016. 28(3): p. 04015155. https://doi: 10.1016/j.conbuildmat.2014.12.024.
  15. Gustafson, G., et al., Grout penetration and sealing in fractured rock. Geotechnical Engineering Journal, 2001. 134(7): p. 897–905.
  16. Eftekhari, A., Aalianvari, A. and Rostami, J., 2018. Influence of TBM operational parameters on optimized penetration rate in schistose rocks, a case study: Golab tunnel Lot-1, Iran. Computers and Concrete, An International Journal, 22(2), pp.239-248.https://doi.org/10.12989/cac.2018.22.2.239
  17. Hanson, B.D., Effect of water-to-cement ratio on grout permeability: Filter pump tests. Geotechnical Testing Journal, 2009. 32(4): p. 321–329.
  18. Eriksson, M., et al., Permeability assessment of cement grouts using permeameter tests. Tunnelling and Underground Space Technology, 2011. 26(2): p. 245–253.
  19. Eklund, D., Stille, H., Permeability of cementitious grouts in rock fractures. International Journal of Rock Mechanics and Mining Sciences, 2008. 45(4): p. 565–573.
  20. Samiei, S. and Aalianvari, A., 2025. A Hybrid AHP-AI Framework for Assessing and Mitigating Tunneling Impacts on Confined Spring Discharge. Journal of Hydraulic Structures, pp.179-189. Doi: 10.22055/jhs.2025.49054.1338
  21. Nonveiller, E., Grouting: Theory and practice. Elsevier, 1989.
  22. Houlsby, A.C., Construction and design of cement grouting: A guide to grouting in rock foundations. Wiley-Interscience, 1990.
  23. Bruce, D.A., Specialty geotechnical construction techniques. Geo-Institute of ASCE, 2004.
  24. Lombardi, G., The role of cohesion in cement grouting of rock. International Journal of Rock Mechanics and Mining Sciences, 2003. 40(3): p. 321–331.
  25. Nazari, M.H., Aalianvari, A. and Tani, M.E., 2025. Contrary trends of grout consumption and water absorption at Sardasht. Scientific Reports, 15(1), p.4667. https://doi.org/10.1038/s41598-025-87884